I use a 3" D-ring binder that I got at Costco (2 in a pack for $5.99). Page protectors from Office Max (I had this in my stash from years ago, but I found a package of 25 for $7.18 at Walmart). The cardboard is from the backing of tablets of paper and paper packs from my work. Since they would eventually recycle or throw them away I got those for free.
I also bought magnetic vent covers from Home Depot. (3 pack for $4.47)
And filing tags from Walmart. (20 pack for $3.97) I use the Post-it ones because I like the option to rearrange if needed. You can substitute paper Post-it instead of the plastic ones I bought.
I covered both sides of my cardboard with cardstock. Cut my magnetic sheets in half to end up with six 7.5" x 8" sheets. I then used a glue runner (ATG) to adhere the magnetic sheets to the finished cardboard pages. I wrote the name of the Die on each label with a sharpie and placed them by their respective Dies.
I numbered the top right corner of each page protector with their respective Nestabilites Die page. I cut out and attached the black chipboard tabs to each Nestabilites Die page with two 4mm eyelets. The black tabs measure 1" x 1.25". Half the tab (1/2") is shown with a number and the other 1/2" is attached to the back of the page. I wrote the numbers on the tabs with a white gel pen.
Here's the cost breakdown for what I spent for a 12 page binder holding 24 Nestabilities Dies: Binder $3, page protector $1.74, magnetic sheets $8.94, tags $3.97, cardstock and cardboard were free. Grand total: $15.92 + local tax. If you have Post-its and page protectors in your stash you can knock off $5.71
Wow, this is a great idea! I have page protectors, post-its, eyelets and all the free cardboard I want. Thanks for sharing.
ReplyDeleteThanks for looking! I have one suggestion. If I were to make another one I would move the magnetic sheets closer to the binder rings so I could stagger/stair step the number tags.
ReplyDeleteLove your idea! Thanks for sharing.Remigia.
ReplyDelete